China New Arrival China 24 Volt Damper Actuator - S6062A Control Valve Actuator – Soloon Manufacturer and Supplier

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Globe Valve Actuator , Hvac Flow Meter , Defrost Sensor Hvac , Therefore, we can meet different inquiries from different clients. Please find our website to check more information from our products.

New Arrival China 24 Volt Damper Actuator - S6062A Control Valve Actuator – Soloon Detail:

Features of S6062A Control Valve Actuator

Die-casting aluminum bracket and ABS cover
Actuator can meet different pressure demand
Synchronous motor, equip with shut power function, it can open at any position due to supply stable torque
forward and reversal control setting meet different valve body

Installation and Cautions of S6062A Control Valve Actuator

1. Reserve enough space for maintenance during installation.

2. The wiring shall comply with the national electrical construction specification, and conducted in the case of power off.

3. The actuator should not be covered by thermal insulation material to prevent it from heat dissipation.

4. Vertical installation should be given priority, and inclined or horizontal installation can be adopted in special occasions, but support and fixation should be added when the volume, weight and vibration are too large.

5. Manual valves are recommended to be installed at both ends of the control valve to facilitate maintenance. During use, grease should be added regularly for three or four months.

6. When the installation position of the control valve is not indicated on the design drawing, the control valve is generally installed on the return water pipe.

Installation Diagram of S6062A Control Valve Actuator

Installation_Diagram1

1. Insert the actuator into valve stem

Installation_Diagram2

2. Tight two screws use hex key

Installation_Diagram3

3. Use manual lever to adjust the stroke, then put gasket into slot, last tight the nut

Attention: the assemble must vertical between actuator and valve body

Dimension of S6062A Control Valve Actuator

Dimension-of-S6062A-Control-Valve-Actuator

Manual Operation:

1. Insert handle

2. Rotate “UP” and “DOWN”.

Technical Parameter of S6062A Control Valve Actuator

Item No.	S6062A-DV	S6062A-FV	S6062A-MV
Voltage	AC220±15%	AC24V±15%	AC24V±15%
Power	16VA
Input Signal	on off	Floating	0-10VDC/4-20mA
Feedback Signal	——-	——	0-10VDC/4-20mA
Act Speed(mm/s)	0.20(50Hz)
Max. Stroke(mm)	44mm
Output Force(N)	2500/4000/5000
End Connection	Buckle
Height(mm)	379
Weight(kgs)	4.7

Environment Temperature: -5℃~55℃ 2.Storage Temperature：-2℃~85℃ 3. Protect Class: IP 44

S6062A-series-Actuator-Instruction

Modulating Wiring of S6062A Control Valve Actuator

The Manufacturer of HVAC Control Valves and Valve Actuators

The HVAC Actuator Valve Working Principle

HVAC Control Valves and Actuators

Product detail pictures:

Related Product Guide:

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for New Arrival China 24 Volt Damper Actuator - S6062A Control Valve Actuator – Soloon , The product will supply to all over the world, such as: Israel , Israel , Iceland , If you give us a list of merchandise you are interested in, along with makes and models, we can send you quotations. Remember to email us directly. Our goal is to establish long-term and mutually profitable business relationships with domestic and overseas clients. We look forward to receiving your reply soon.

Product Inquiry

If you are interested in our products.

Please fill in the form & Contact Us.

+86 10 67863711

soloon@126.com

Products

News & Blog