Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for
Motorized Three Way Ball Valve
,
Modulating Damper Actuator
,
Control Damper Actuator
, We always regard the technology and prospects as the uppermost. We always function hard to make terrific values for our prospects and give our customers far better products and solutions & solutions.
Hot-selling Steam Control Valves With Pneumatic Actuators -
S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon Detail:
Features of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
- Torque 32NM
- 2 or 3 points
- Actuator and damper shaft are bolt-on by screw.
- Maximum round shaft φ20 and square shaft 16*16mm.
- Direction of rotation can be setting.
- Manuel Override
- With 2 auxiliary switches are optional
- Power supply AC/DC 24V or AC 230V
Outline and Mounting Dimension of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Technical Datasheet of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
| Item |
Unit |
S6061-32DN（F）
|
S6061-32DN（F）
|
| Torque |
Nm |
32 Nm |
| Damper area |
m2 |
6 m2 |
| Running time |
sec |
114~138 |
| Power supply |
V |
24VAC/DC |
220VAC |
| Frequency |
Hz |
50/60
7.5W 50/60Hz |
| Running consumption |
W |
4.0W |
5.5W |
| Maintaining consumption |
W |
0.5W |
1.0W |
| Weight |
Kg |
1.25Kg |
| Control signal |
2/3 point |
| Rotation angle |
0~90º（Max 93°） |
| Limited angle |
5~85º（Per step 5º） |
| Auxiliary switch rating |
3（1.5）Amp 250V |
| Life cycle |
>70000 cycles |
| Noise level |
45dB(A) |
| Electrical level |
Ⅱ |
| Protection level |
IP44 or IP54 |
| Ambient Temperature |
-20~+50℃ |
| Ambient Humidity |
5~95%RH |
| Storage temperature |
-40~+70℃ |
| Certificate |
CE UL（Except 230V） |
Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.
Wiring Diagram of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Wiring Diagram of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Resistance feedback
Auxiliary Switch of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
There are two auxiliary switches of S6061-32DF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.
Angle of Rotation Limiting of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.
Control Signal and Choose the Rotate Direction of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Must make the contact pin(C) in as Same direction as motor plug.
Factory setting:
Switch an at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of
Hot-selling Steam Control Valves With Pneumatic Actuators -
S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon , The product will supply to all over the world, such as: Switzerland
, Accra
, Turkey
, Since the establishment of our company, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it.
+86 10 67863711
SEARCH
Product Inquiry
