Soloon Controls (Beijing) Co., Ltd. +86 10 67863711
soloon-logo
soloon-logo
Contact Us
S6025 Fluid Level Switch

Good Quality Hvac Sensor - S6022 Flow Switch – Soloon

Good Quality Hvac Sensor -
 S6022 Flow Switch  – Soloon
Sincerity, Innovation, Rigorousness, and Efficiency is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Motorized Zone Valve , Hvac Air Quality Sensor , Electric Motorized Ball Valve , All products and solutions arrive with high quality and fantastic after-sales expert services. Market-oriented and customer-oriented are what we now have been being immediately after. Sincerely look ahead to Win-Win cooperation !
Good Quality Hvac Sensor - S6022 Flow Switch – Soloon Detail:

Feature of S6025 Fluid Level Switch

Rated voltage VRated Current A Power COS ø 125VAC 250V AC
No induced load current 1 15 15
Induced load Full load current 0.75 3.5 2.5
Current Instantaneous current 0.45 21 15

Figure1: Technological Parameter 1

Valve Size Connector MaxPressure

(Mpa)

Protection AllowableMedium Temp. Wet.(Kg) Modulating Range of Flow
Pipe Size Min. Max.
Flow decrease Flow increase Flow decrease Flow increase
3″ 1″-11½ (NPT) 1.60 IP65 -30~120 0.6 1″ 2.5 4.2 8.5 8.8
2″ 9.5 13.7 27 29
3″ 19 27.5 50 53

Figure 2: Technological Parameter 2

When there is sufficient fluid through the pipe, the loop closes up between red and blue contacts.

s6022-flow-switch-2

Mounting of S6022 Flow Switch

  • Mount the switch in a section of pipe where there is a straight run of at least five pipe diameters on each side of the flow switch.
  • The switch should be mounted so that the terminals or wire leads are easily accessible for wiring.
  • Screw the flow switch into position so that the flat of the paddle is at a right angle to the flow. The arrow on the side of the case must point in the direction of the flow.
  • The switch must be mounted in a horizontal pipeline or a vertical pipeline with upward liquid flow. It is not recommended for installation where liquid flow is downwards. When mounted in a vertical pipe with the upward flow the switch trips will operate at a slightly higher flow than shown in Figure 4: “Typical Flow Rates”, due to the effect of gravity on the switch mechanism.
  • All wiring connections must be made using copper conductors only.
  • All wiring must be installed in accordance with the National Electric Code and local regulations

Flow Rate of S6022 Flow Switch

 

* + GPM figures are for a switch with a 6” paddle.

* For 4” and 5” line pipes, the 6” paddle is trimmed to a 4” and 5” length, respectively.

* For switching action, refer to figure 3.

GPM (m3/hr) Required to Actuate Switch
Pipe Size (in.) 1 1-1/4 1-1/2 2 2-1/2 3 4* 5* 6* 8*
Minimum Adjustment Flow increasingred→yellow

closed**

4.2(1.0) 5.8(1.3) 7.5(1.7) 13.7(3.1) 18.0(4.1) 27.5(6.2) 65.0(14.8)

37.0+

(8.4)

125.0(28.4)

57.0+

(12.9)

190.0(43.1)

74.0+

(16.8)

375.0(85.2)

205.0+

(46.6)

Flow decreasingred→blue

closed**

2.5(0.6) 3.7(0.8) 5.0(1.1) 9.5(2.2) 12.5(2.8) 19.0(4.3) 50.0(11.4)

27.0+

(6.1)

101.0(22.9)

41.0+

(9.3)

158.0(35.9)

54.0+

(12.3)

320.0(72.7)

170.0+

(38.6)

Maximum Adjustment Flow increasingred→yellow

closed**

8.8(2.0) 13.3(3.0) 19.2(4.4) 29.0(6.6) 34.5(7.8) 53.0(12.0) 128.0(29.1)

81.0+

(18.4)

245.0(55.6)

118.0+

(26.8)

375.0(85.2)

144.0

(32.7)

760.0(172.6)

415.0+

(94.2)

Flow decreasingred→blue

closed**

8.5(1.9) 12.5(2.8) 18.0(4.1) 27.0(6.1) 32.0(7.3) 50.0(11.4) 122.0(27.7)

76.0+

(17.3)

235(53.4)

111.0+

(25.2)

360.0(81.8)

135.0+

(30.7)

730.0(165.8)

400.0+

(90.8)


Product detail pictures:

Good Quality Hvac Sensor -
 S6022 Flow Switch  – Soloon detail pictures


Related Product Guide:

To meet the customers' over-expected pleasure , we have now our solid crew to supply our greatest all round assistance which includes marketing, sales, planning, production, top quality controlling, packing, warehousing and logistics for Good Quality Hvac Sensor - S6022 Flow Switch – Soloon , The product will supply to all over the world, such as: Florence , Albania , Mauritius , The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.
Contact Us Product Inquiry
Contact Us
If you are interested in our products.
Please fill in the form & Contact Us.
+86 10 67863711