Fixed Competitive Price Motorized Valve 2 Inch - S6067 PN16 Internal thread BSP DN15-DN50 – Soloon

Application of S6067 PN16 Internal thread BSP DN15-DN50

Used for pre-set control of pipeline flow, this series of products are mainly used to solve the problem of hydraulic imbalance in the fluid transmission and distribution network. According to the system design, it is determined that the branch water supply is constant under the premise of different openings and pressure differences.

The KMF.. balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the secondary side in heating and cooling systems, and tap water systems.

Features of S6067 PN16 Internal thread BSP DN15-DN50

• The static balance valve has a precise design, simple structure, and accurate parameters. After the product is installed, the flow should be debugged to meet the flow under the premise of setting the pressure difference. It is an energy-saving product.
• Used in heating or cooling water systems.
• Shutdown function.
• The maximum stroke locking function, when the system is commissioned, can be turned on to provide convenience for future pipeline maintenance and repair. After maintenance or repair, the valve can be directly restored to the set maximum stroke to avoid secondary debugging.
• The valve carries a measurement joint, which is convenient for quick connection with the measurement equipment and saves debugging time.
• Can be installed in the water supply or return water pipeline.

Material of S6067 PN16 Internal thread BSP DN15-DN50

Permissible Media of S6067 PN16 Internal thread BSP DN15-DN50

Types and Technical Data of S6067 PN16 Internal thread BSP DN15-DN50

Product number	DN	Connections		PN	L	H
6067.15	15	1/2 in	Internal thread (BSP)	PN16	80	114
6067.20	20	3/4 in			85	116
6067.25	25	1 in			98	119
6067.32	32	11/4 in			110	136
6067.40	40	11/2 in			120	138
6067.50	50	2 in			150	148
6068.65	65	Flanged(ISO7005-2/ GB 17241.6)			290	285
6068.80	80				310	324
6068.100	100				350	355
6068.125	125				400	410
6068.150	150				480	477
6068.200	200				600	613
6068.250	250				730	740
6068.300	300				850	828
6068.350	350				980	970
6068.400	400				1100	1100

Kv values of S6067 PN16 Internal thread BSP DN15-DN50

Internal thread (DN15-50)

Flanged (DN65-400)

Measuring Accuracy of S6067 PN16 Internal thread BSP DN15-DN50

The zero position is calibrated and must not be changed.

Deviation of flow at different settings

The curve (Fig. 1) is valid for valves with normal pipe fittings (Fig.2). Try also to avoid mounting taps and pumps, immediately before the valve.

Fig.2

Adjust the scale of the handwheel according to the design requirements.

Exhaust devices should be installed in the system piping, and the system can contain air, which may cause media blockage, failure of the adjustment function, or excessive noise;

It is recommended to add a filter or clean the pipeline at the water inlet of the valve to avoid large particles of impurities blocking the valve control element;

Pay attention to the protection of the detection hole, if it is touched or deformed, it will cause leakage or difficult maintenance in the future.

Setting off of S6067 PN16 Internal thread BSP DN15-DN50

Adjust the scale of the handwheel according to the design requirements.

This valve has the function of presetting the maximum flow rate. Use a hexagonal wrench to rotate the maximum opening limit core clockwise, so that the maximum opening of the valve can be limited, and subsequent system maintenance will not require debugging.

Application Method of S6067 PN16 Internal thread BSP DN15-DN50

The balance valve can be used alone to control the flow of the system, or it can be used in conjunction with the differential pressure valve. When the valve is installed, the water flow direction must be consistent with the direction of the arrow on the valve. In order to ensure the measurement accuracy, please ensure that there are straight pipe sections before and after the valve(Fig.2)