Our business puts emphasis on the administration, the introduction of talented personnel, as well as the construction of team building, trying hard to further improve the standard and liability consciousness of staff members customers. Our enterprise successfully attained IS9001 Certification and European CE Certification of
Motorized Ball Valve 12v
,
Electric Ball Valve For Water
,
Hvac Humidity Sensor
, With us your money in protected your business enterprise in secure . Hope we can be your trustworthy supplier in China . Searching forward for your cooperation .
Factory wholesale Modulating Damper Actuator -
S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon Detail:
Features of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
- Torque 32NM
- 2 or 3 points
- Actuator and damper shaft are bolt-on by screw.
- Maximum round shaft φ20 and square shaft 16*16mm.
- Direction of rotation can be setting.
- Manuel Override
- With 2 auxiliary switches are optional
- Power supply AC/DC 24V or AC 230V
Outline and Mounting Dimension of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Technical Datasheet of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
| Item |
Unit |
S6061-32DN（F）
|
S6061-32DN（F）
|
| Torque |
Nm |
32 Nm |
| Damper area |
m2 |
6 m2 |
| Running time |
sec |
114~138 |
| Power supply |
V |
24VAC/DC |
220VAC |
| Frequency |
Hz |
50/60
7.5W 50/60Hz |
| Running consumption |
W |
4.0W |
5.5W |
| Maintaining consumption |
W |
0.5W |
1.0W |
| Weight |
Kg |
1.25Kg |
| Control signal |
2/3 point |
| Rotation angle |
0~90º（Max 93°） |
| Limited angle |
5~85º（Per step 5º） |
| Auxiliary switch rating |
3（1.5）Amp 250V |
| Life cycle |
>70000 cycles |
| Noise level |
45dB(A) |
| Electrical level |
Ⅱ |
| Protection level |
IP44 or IP54 |
| Ambient Temperature |
-20~+50℃ |
| Ambient Humidity |
5~95%RH |
| Storage temperature |
-40~+70℃ |
| Certificate |
CE UL（Except 230V） |
Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.
Wiring Diagram of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Wiring Diagram of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Resistance feedback
Auxiliary Switch of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
There are two auxiliary switches of S6061-32DF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.
Angle of Rotation Limiting of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.
Control Signal and Choose the Rotate Direction of S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Must make the contact pin(C) in as Same direction as motor plug.
Factory setting:
Switch an at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.
Product detail pictures:
Related Product Guide:
continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for
Factory wholesale Modulating Damper Actuator -
S6061-32D Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon , The product will supply to all over the world, such as: luzern
, Sheffield
, Florence
, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
+86 10 67863711
SEARCH
Product Inquiry
