China Factory Price For Motorized Valve Actuator - S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon Manufacturer and Supplier

We insist about the theory of growth of 'High excellent, Performance, Sincerity and Down-to-earth working approach' to offer you with great company of processing for Hvac Static Pressure Measurement , Automated Ball Valve Actuator , Ac Thermostat Temperature Sensor , Seeing believes! We sincerely welcome the new clients abroad to build organization associations and also hope to consolidate the associations while using the long-established prospects.

Factory Price For Motorized Valve Actuator - S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon Detail:

Features of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Torque 32NM
0(4)…20mA 0(2)…10V
Maximum round shaft φ20 and square shaft 16*16mm.
Direction of rotation can be set.
Manual Override
With 2 auxiliary switches are optional
Power supply AC/DC 24V or AC 230V
Modulating

Outline and Dimension of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

s6061-32a-damper-actuator-standard-damper-actuator-non-fail-safe-damper-actuators-1

Technical Datasheet of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Item	Unit	S6061-32AN（F）
Torque	Nm	32Nm
Damper area	m²	6m²
Running time	sec	114~138
Power supply	V	24VAC/DC
Frequency	Hz	50/60 7.5W 50/60Hz
Running consumption	W	2.5W
Maintaining consumption	W	0.3W
Weight	Kg	1.25Kg
Control signal		0(4)…20mA 0(2)…10V
Rotation angle		0~90º（Max 93°）
Limited angle		5~85º（Per step 5º）
Auxiliary switch rating		3（1.5）Amp 250V
Life cycle		>70000 cycles
Noise level		45dB(A)
Electrical level		Ⅱ
Protection level		IP44 or IP54
Ambient Temperature		-20~+50℃
Ambient Humidity		5~95%RH
Storage temperature		-40~+70℃
Certificate		CE UL

Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.

Angle of Rotation Limiting of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.

s6061-32a-damper-actuator-standard-damper-actuator-non-fail-safe-damper-actuators-2

Wiring Diagram of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

0(4)…20mA and 0(2)…10V

The actuator’s main/subsidiary control:

s6061-32a-damper-actuator-standard-damper-actuator-non-fail-safe-damper-actuators-4

Signal Control and Changing Direction of Rotation of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

The electronic controller of VR1 and VR2 can set the scope of control signals discretionally. VR1 is used for setting high-grade signals. And VR2 is used for setting low-grade signals. The leaving factory setting positions are matched with the control signal of 0…20mA, 0…10V.

s6061-32a-damper-actuator-standard-damper-actuator-non-fail-safe-damper-actuators-5

Setting the Angle of Direction of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

s6061-32a-damper-actuator-standard-damper-actuator-non-fail-safe-damper-actuators-6

Must make the contact pin(C) is as Same direction as motor plug.

Factory setting:

Switch a at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.

Auxiliary Switch of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

There are two auxiliary switches of S6061-32AF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.

s6061-32a-damper-actuator-standard-damper-actuator-non-fail-safe-damper-actuators-7

What is HVAC Air Duct Damper Actuator?

The Function of HVAC Air Duct Damper Actuator

Product detail pictures: