China China Manufacturer for Electronically Actuated Valves - S6062A Control Valve Actuator – Soloon Manufacturer and Supplier

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Motorised Valve Actuator , Wireless Hvac Sensors , Air Conditioner Thermostat Replacement , Hope we can create a more glorious future with you through our efforts in the future.

China Manufacturer for Electronically Actuated Valves - S6062A Control Valve Actuator – Soloon Detail:

Features of S6062A Control Valve Actuator

Die-casting aluminum bracket and ABS cover
Actuator can meet different pressure demand
Synchronous motor, equip with shut power function, it can open at any position due to supply stable torque
forward and reversal control setting meet different valve body

Installation and Cautions of S6062A Control Valve Actuator

1. Reserve enough space for maintenance during installation.

2. The wiring shall comply with the national electrical construction specification, and conducted in the case of power off.

3. The actuator should not be covered by thermal insulation material to prevent it from heat dissipation.

4. Vertical installation should be given priority, and inclined or horizontal installation can be adopted in special occasions, but support and fixation should be added when the volume, weight and vibration are too large.

5. Manual valves are recommended to be installed at both ends of the control valve to facilitate maintenance. During use, grease should be added regularly for three or four months.

6. When the installation position of the control valve is not indicated on the design drawing, the control valve is generally installed on the return water pipe.

Installation Diagram of S6062A Control Valve Actuator

Installation_Diagram1

1. Insert the actuator into valve stem

Installation_Diagram2

2. Tight two screws use hex key

Installation_Diagram3

3. Use manual lever to adjust the stroke, then put gasket into slot, last tight the nut

Attention: the assemble must vertical between actuator and valve body

Dimension of S6062A Control Valve Actuator

Dimension-of-S6062A-Control-Valve-Actuator

Manual Operation:

1. Insert handle

2. Rotate “UP” and “DOWN”.

Technical Parameter of S6062A Control Valve Actuator

Item No.	S6062A-DV	S6062A-FV	S6062A-MV
Voltage	AC220±15%	AC24V±15%	AC24V±15%
Power	16VA
Input Signal	on off	Floating	0-10VDC/4-20mA
Feedback Signal	——-	——	0-10VDC/4-20mA
Act Speed(mm/s)	0.20(50Hz)
Max. Stroke(mm)	44mm
Output Force(N)	2500/4000/5000
End Connection	Buckle
Height(mm)	379
Weight(kgs)	4.7

Environment Temperature: -5℃~55℃ 2.Storage Temperature：-2℃~85℃ 3. Protect Class: IP 44

S6062A-series-Actuator-Instruction

Modulating Wiring of S6062A Control Valve Actuator

The Manufacturer of HVAC Control Valves and Valve Actuators

The HVAC Actuator Valve Working Principle

HVAC Control Valves and Actuators

Product detail pictures:

Related Product Guide:

Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science as well as the theory of quality the basic, believe in the 1st and management the advanced for China Manufacturer for Electronically Actuated Valves - S6062A Control Valve Actuator – Soloon , The product will supply to all over the world, such as: Barbados , Colombia , Turkmenistan , To meet the requirements of individual customers for each bit more perfect service and stable quality products. We warmly welcome customers around the world to visit us, with our multi-faceted cooperation, and jointly develop new markets, create a brilliant future!

Product Inquiry

If you are interested in our products.

Please fill in the form & Contact Us.

+86 10 67863711

soloon@126.com

Products

News & Blog