Our commission would be to serve our customers and clientele with very best excellent and aggressive portable digital products for
Hvac Sensor
,
2 Inch Electric Ball Valve
,
Ac Thermostat Controlled By Phone
, Should you be on the lookout forever Quality at a very good price tag and timely delivery. Do speak to us.
Best Price for Globe Valve Actuator -
S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon Detail:
Features of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
- Torque 32NM
- 0(4)…20mA 0(2)…10V
- Maximum round shaft φ20 and square shaft 16*16mm.
- Direction of rotation can be set.
- Manual Override
- With 2 auxiliary switches are optional
- Power supply AC/DC 24V or AC 230V
- Modulating
Outline and Dimension of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Technical Datasheet of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Item |
Unit |
S6061-32AN(F) |
Torque |
Nm |
32Nm |
Damper area |
m2 |
6m2 |
Running time |
sec |
114~138 |
Power supply |
V |
24VAC/DC |
Frequency |
Hz |
50/60
7.5W 50/60Hz |
Running consumption |
W |
2.5W |
Maintaining consumption |
W |
0.3W |
Weight |
Kg |
1.25Kg |
Control signal |
0(4)…20mA 0(2)…10V |
Rotation angle |
0~90º(Max 93°) |
Limited angle |
5~85º(Per step 5º) |
Auxiliary switch rating |
3(1.5)Amp 250V |
Life cycle |
>70000 cycles |
Noise level |
45dB(A) |
Electrical level |
Ⅱ |
Protection level |
IP44 or IP54 |
Ambient Temperature |
-20~+50℃ |
Ambient Humidity |
5~95%RH |
Storage temperature |
-40~+70℃ |
Certificate |
CE UL |
Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.
Angle of Rotation Limiting of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.

Wiring Diagram of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
0(4)…20mA and 0(2)…10V
The actuator’s main/subsidiary control:
Signal Control and Changing Direction of Rotation of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The electronic controller of VR1 and VR2 can set the scope of control signals discretionally. VR1 is used for setting high-grade signals. And VR2 is used for setting low-grade signals. The leaving factory setting positions are matched with the control signal of 0…20mA, 0…10V.

Setting the Angle of Direction of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Must make the contact pin(C) is as Same direction as motor plug.
Factory setting:
Switch a at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.
Auxiliary Switch of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
There are two auxiliary switches of S6061-32AF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.

The Function of HVAC Air Duct Damper Actuator
Product detail pictures:
Related Product Guide:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for
Best Price for Globe Valve Actuator -
S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon , The product will supply to all over the world, such as: Iran
, Amsterdam
, Lahore
, The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.