The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for
Motorized Ball Valve ,
1 Motorized Ball Valve ,
Controlli Actuator , We adhere to the tenet of "Services of Standardization, to Meet Customers' Demands".
Best Price for Globe Valve Actuator - S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon Detail:
Features of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
- Torque 32NM
- 0(4)…20mA 0(2)…10V
- Maximum round shaft φ20 and square shaft 16*16mm.
- Direction of rotation can be set.
- Manual Override
- With 2 auxiliary switches are optional
- Power supply AC/DC 24V or AC 230V
- Modulating
Outline and Dimension of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Technical Datasheet of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Item |
Unit |
S6061-32AN(F) |
Torque |
Nm |
32Nm |
Damper area |
m2 |
6m2 |
Running time |
sec |
114~138 |
Power supply |
V |
24VAC/DC |
Frequency |
Hz |
50/60
7.5W 50/60Hz |
Running consumption |
W |
2.5W |
Maintaining consumption |
W |
0.3W |
Weight |
Kg |
1.25Kg |
Control signal |
0(4)…20mA 0(2)…10V |
Rotation angle |
0~90º(Max 93°) |
Limited angle |
5~85º(Per step 5º) |
Auxiliary switch rating |
3(1.5)Amp 250V |
Life cycle |
>70000 cycles |
Noise level |
45dB(A) |
Electrical level |
Ⅱ |
Protection level |
IP44 or IP54 |
Ambient Temperature |
-20~+50℃ |
Ambient Humidity |
5~95%RH |
Storage temperature |
-40~+70℃ |
Certificate |
CE UL |
Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.
Angle of Rotation Limiting of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.
Wiring Diagram of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
0(4)…20mA and 0(2)…10V
The actuator’s main/subsidiary control:
Signal Control and Changing Direction of Rotation of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The electronic controller of VR1 and VR2 can set the scope of control signals discretionally. VR1 is used for setting high-grade signals. And VR2 is used for setting low-grade signals. The leaving factory setting positions are matched with the control signal of 0…20mA, 0…10V.
Setting the Angle of Direction of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Must make the contact pin(C) is as Same direction as motor plug.
Factory setting:
Switch a at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.
Auxiliary Switch of S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators)
There are two auxiliary switches of S6061-32AF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.
The Function of HVAC Air Duct Damper Actuator
Product detail pictures:
Related Product Guide:
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for Best Price for Globe Valve Actuator - S6061-32A Damper Actuator Standard Damper Actuator (Non Fail-Safe Damper Actuators) – Soloon , The product will supply to all over the world, such as: Stuttgart, Somalia, New Orleans, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.