China Renewable Design for Remote Actuated Valve - S6062A Control Valve Actuator – Soloon Manufacturer and Supplier

Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for Electric Valve Actuators , Remote Control Valve Actuators , Motorized Three Way Valve , We warmly welcome domestic and abroad buyers deliver inquiry to us ,we now have 24hours doing work team! Anytime anywhere we are still here to be your partner.

Renewable Design for Remote Actuated Valve - S6062A Control Valve Actuator – Soloon Detail:

Features of S6062A Control Valve Actuator

Die-casting aluminum bracket and ABS cover
Actuator can meet different pressure demand
Synchronous motor, equip with shut power function, it can open at any position due to supply stable torque
forward and reversal control setting meet different valve body

Installation and Cautions of S6062A Control Valve Actuator

1. Reserve enough space for maintenance during installation.

2. The wiring shall comply with the national electrical construction specification, and conducted in the case of power off.

3. The actuator should not be covered by thermal insulation material to prevent it from heat dissipation.

4. Vertical installation should be given priority, and inclined or horizontal installation can be adopted in special occasions, but support and fixation should be added when the volume, weight and vibration are too large.

5. Manual valves are recommended to be installed at both ends of the control valve to facilitate maintenance. During use, grease should be added regularly for three or four months.

6. When the installation position of the control valve is not indicated on the design drawing, the control valve is generally installed on the return water pipe.

Installation Diagram of S6062A Control Valve Actuator

Installation_Diagram1

1. Insert the actuator into valve stem

Installation_Diagram2

2. Tight two screws use hex key

Installation_Diagram3

3. Use manual lever to adjust the stroke, then put gasket into slot, last tight the nut

Attention: the assemble must vertical between actuator and valve body

Dimension of S6062A Control Valve Actuator

Dimension-of-S6062A-Control-Valve-Actuator

Manual Operation:

1. Insert handle

2. Rotate “UP” and “DOWN”.

Technical Parameter of S6062A Control Valve Actuator

Item No.	S6062A-DV	S6062A-FV	S6062A-MV
Voltage	AC220±15%	AC24V±15%	AC24V±15%
Power	16VA
Input Signal	on off	Floating	0-10VDC/4-20mA
Feedback Signal	——-	——	0-10VDC/4-20mA
Act Speed(mm/s)	0.20(50Hz)
Max. Stroke(mm)	44mm
Output Force(N)	2500/4000/5000
End Connection	Buckle
Height(mm)	379
Weight(kgs)	4.7

Environment Temperature: -5℃~55℃ 2.Storage Temperature：-2℃~85℃ 3. Protect Class: IP 44

S6062A-series-Actuator-Instruction

Modulating Wiring of S6062A Control Valve Actuator

The Manufacturer of HVAC Control Valves and Valve Actuators

The HVAC Actuator Valve Working Principle

HVAC Control Valves and Actuators

Product detail pictures:

Related Product Guide:

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for Renewable Design for Remote Actuated Valve - S6062A Control Valve Actuator – Soloon , The product will supply to all over the world, such as: Madagascar , Jamaica , Malta , All styles appear on our website are for customizing. We meet up to personal requirements with all products of your very own styles. Our concept is to help presenting the confidence of each buyers with the offering of our most sincere service, and the right product.

Product Inquiry

If you are interested in our products.

Please fill in the form & Contact Us.

+86 10 67863711

soloon@126.com

Products

News & Blog