Good quality comes to start with; service is foremost; organization is cooperation is our enterprise philosophy which is regularly observed and pursued by our firm for
Duct Damper Actuator
,
Self Actuated Control Valve
,
Hvac Temp Sensor
, Our team members are aim to provides products with high performance cost ratio to our customers, and the goal for all of us is to satisfy our consumers from all over the world.
Factory wholesale Modulating Damper Actuator -
S6061-08/16 Modulating Rapid Running Damper Actuator – Soloon Detail:
Features of S6061-08/16 Modulating Rapid Running Damper Actuator
- With 2 auxiliary switches are optional
- Torque 08/16NM
- Power supply AC/DC 24V or AC 230V
- Modulating
Outline and Mounting Dimension of S6061-08/16 Modulating Rapid Running Damper Actuator
Technical Datasheet of S6061-08/16 Modulating Rapid Running Damper Actuator
| Item |
Unit |
S6061-08
AFK |
S6061-16
AFK |
S6061-08ANK |
S6061-16ANK |
| Torque |
Nm |
8 |
16 |
8 |
16 |
| Damper area |
m2 |
2 |
4 |
2 |
4 |
| Running time |
sec |
8 |
16 |
8 |
16 |
| Power supply |
V |
24VAC/DV |
| Frequency |
Hz |
50/60
7.5W 50/60Hz |
| Running consumption |
W |
8.5W |
| Maintaining consumption |
W |
0.7W |
| Weight |
Kg |
1.Kg |
| Control signal |
0(4)…20mA 0(2)…10V |
| Rotation angle |
0~90º（Max 93°） |
| Limited angle |
5~85º（Per step 5º） |
| Auxiliary switch rating |
3（1.5）Amp 250V |
| Life cycle |
>70000 cycles |
| Noise level |
45dB(A) |
| Electrical level |
Ⅱ |
| Protection level |
IP44 or IP54 |
| Ambient Temperature |
-20~+50℃ |
| Ambient Humidity |
5~95%RH |
| Storage temperature |
-40~+70℃ |
|
| Certificate |
CE UL（Except 230V） |
Remark: After lead out the Actuator wire by PG joint, the IP Protection can reach IP54.
Angle of Rotation Limiting of S6061-08/16 Modulating Rapid Running Damper Actuator
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.
Wiring diagram of S6061-08/16 Modulating Rapid Running Damper Actuator
S6061-08/16AK Damper Actuator can operate by 0(4)…20mA and 0(2)…10V
Main/subsidiary control of S6061-08/16 Modulating Rapid Running Damper Actuator
Control Signal and Choose the Rotate direction of S6061-08/16 Modulating Rapid Running Damper Actuator
The electronic controller of VR1 and VR2 can set the scope of control signals discretionally. VR1 is used for setting high-grade signals. And VR2 is used for setting low-grade signals. The leaving factory setting positions are matched with the control signal of 0…20mA, 0…10V.
Setting the angle of direction of S6061-08/16 Modulating Rapid Running Damper Actuator
Must make the contact pin(C) is as Same direction as motor plug.
Factory setting of S6061-08/16 Modulating Rapid Running Damper Actuator
Switch at 10° – Switch b at 80°
The switching position can be manually changed to any required position by turning the ratchet.
Auxiliary Switch specification of S6061-08/16 Modulating Rapid Running Damper Actuator
There are two auxiliary switches of S6061-08/16AFK damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.
Product detail pictures:
Related Product Guide:
We attempt for excellence, support the customers, hopes to become the top cooperation team and dominator enterprise for staff, suppliers and shoppers, realizes worth share and continual marketing for
Factory wholesale Modulating Damper Actuator -
S6061-08/16 Modulating Rapid Running Damper Actuator – Soloon , The product will supply to all over the world, such as: Norway
, UK
, Liberia
, We aim to become the modern enterprise with the commercial ideal of Sincerity and confidence and with the aim of Offering customers the most sincere services and best quality products. We sincerely ask for your unchanged support and appreciate your kind advice and guidance.
+86 10 67863711
SEARCH
Product Inquiry
