Soloon Controls (Beijing) Co., Ltd. +86 10 67863711
soloon-logo
soloon-logo
Contact Us
S6025 Fluid Level Switch

100% Original Hvac Defrost Sensor - S6022 Flow Switch – Soloon

100% Original Hvac Defrost Sensor -
 S6022 Flow Switch  – Soloon
In order to best meet client's needs, all of our operations are strictly performed in line with our motto High Quality, Competitive Price, Fast Service for 3 Way Electric Ball Valve , Wifi Fan Coil Thermostat , Spring Return Electric Ball Valve , We will keep working hard and as we try our best to supply the best quality products, most competitive price and excellent service to every customer. Your satisfaction, our glory!!!
100% Original Hvac Defrost Sensor - S6022 Flow Switch – Soloon Detail:

Feature of S6025 Fluid Level Switch

Rated voltage VRated Current A Power COS ø 125VAC 250V AC
No induced load current 1 15 15
Induced load Full load current 0.75 3.5 2.5
Current Instantaneous current 0.45 21 15

Figure1: Technological Parameter 1

Valve Size Connector MaxPressure

(Mpa)

Protection AllowableMedium Temp. Wet.(Kg) Modulating Range of Flow
Pipe Size Min. Max.
Flow decrease Flow increase Flow decrease Flow increase
3″ 1″-11½ (NPT) 1.60 IP65 -30~120 0.6 1″ 2.5 4.2 8.5 8.8
2″ 9.5 13.7 27 29
3″ 19 27.5 50 53

Figure 2: Technological Parameter 2

When there is sufficient fluid through the pipe, the loop closes up between red and blue contacts.

s6022-flow-switch-2

Mounting of S6022 Flow Switch

  • Mount the switch in a section of pipe where there is a straight run of at least five pipe diameters on each side of the flow switch.
  • The switch should be mounted so that the terminals or wire leads are easily accessible for wiring.
  • Screw the flow switch into position so that the flat of the paddle is at a right angle to the flow. The arrow on the side of the case must point in the direction of the flow.
  • The switch must be mounted in a horizontal pipeline or a vertical pipeline with upward liquid flow. It is not recommended for installation where liquid flow is downwards. When mounted in a vertical pipe with the upward flow the switch trips will operate at a slightly higher flow than shown in Figure 4: “Typical Flow Rates”, due to the effect of gravity on the switch mechanism.
  • All wiring connections must be made using copper conductors only.
  • All wiring must be installed in accordance with the National Electric Code and local regulations

Flow Rate of S6022 Flow Switch

 

* + GPM figures are for a switch with a 6” paddle.

* For 4” and 5” line pipes, the 6” paddle is trimmed to a 4” and 5” length, respectively.

* For switching action, refer to figure 3.

GPM (m3/hr) Required to Actuate Switch
Pipe Size (in.) 1 1-1/4 1-1/2 2 2-1/2 3 4* 5* 6* 8*
Minimum Adjustment Flow increasingred→yellow

closed**

4.2(1.0) 5.8(1.3) 7.5(1.7) 13.7(3.1) 18.0(4.1) 27.5(6.2) 65.0(14.8)

37.0+

(8.4)

125.0(28.4)

57.0+

(12.9)

190.0(43.1)

74.0+

(16.8)

375.0(85.2)

205.0+

(46.6)

Flow decreasingred→blue

closed**

2.5(0.6) 3.7(0.8) 5.0(1.1) 9.5(2.2) 12.5(2.8) 19.0(4.3) 50.0(11.4)

27.0+

(6.1)

101.0(22.9)

41.0+

(9.3)

158.0(35.9)

54.0+

(12.3)

320.0(72.7)

170.0+

(38.6)

Maximum Adjustment Flow increasingred→yellow

closed**

8.8(2.0) 13.3(3.0) 19.2(4.4) 29.0(6.6) 34.5(7.8) 53.0(12.0) 128.0(29.1)

81.0+

(18.4)

245.0(55.6)

118.0+

(26.8)

375.0(85.2)

144.0

(32.7)

760.0(172.6)

415.0+

(94.2)

Flow decreasingred→blue

closed**

8.5(1.9) 12.5(2.8) 18.0(4.1) 27.0(6.1) 32.0(7.3) 50.0(11.4) 122.0(27.7)

76.0+

(17.3)

235(53.4)

111.0+

(25.2)

360.0(81.8)

135.0+

(30.7)

730.0(165.8)

400.0+

(90.8)


Product detail pictures:

100% Original Hvac Defrost Sensor -
 S6022 Flow Switch  – Soloon detail pictures


Related Product Guide:

Our mission should be to turn out to be an innovative supplier of high-tech digital and communication devices by furnishing benefit added design and style, world-class manufacturing, and repair capabilities for 100% Original Hvac Defrost Sensor - S6022 Flow Switch – Soloon , The product will supply to all over the world, such as: Irish , Vancouver , Costa Rica , Strong infrastructure is the need of any organization. We are backed with a robust infrastructural facility that enables us to manufacture, store, quality check and dispatch our products worldwide. To maintain smooth work flow, we have sectioned our infrastructure into a number of departments. All these departments are functional with latest tools, modernized machines and equipment. Owing to which, we are able to accomplish voluminous production without compromising upon the quality.
Contact Us Product Inquiry
Contact Us
If you are interested in our products.
Please fill in the form & Contact Us.
+86 10 67863711