Soloon Controls (Beijing) Co., Ltd. +86-10-67886688
Soloon Controls (Beijing) Co., Ltd.
Soloon Controls (Beijing) Co., Ltd.
Contact Us
S6062B Control Valve Actuator

S6062B Control Valve Actuator

3X2 series actuator matches with valve body, which can regulate the fluid flow, aim to system constant temperature, constant pressure, constant humidity, widely used in HVAC application.

Features of S6062B Control Valve Actuator

  1. Die-casting aluminum bracket and ABS cover

  2. Actuator can meet different pressure demand

  3. Synchronous motor, equip with shut power function, it can open at any position due to supply stable torque

  4. forward and reversal control setting meet different valve body

Installation and Cautions of S6062B Control Valve Actuator

1. Reserve enough space for maintenance during installation.

2. The wiring shall comply with the national electrical construction specification, and conducted in the case of power off.

3. The actuator should not be covered by thermal insulation material to prevent it from heat dissipation.

4. Vertical installation should be given priority, and inclined or horizontal installation can be adopted in special occasions, but support and fixation should be added when the volume, weight and vibration are too large.

5. Manual valves are recommended to be installed at both ends of the control valve to facilitate maintenance. During use, grease should be added regularly for three or four months.

6. When the installation position of the control valve is not indicated on the design drawing, the control valve is generally installed on the return water pipe.

Installation Diagram of S6062B Control Valve Actuator

Installation_Diagram1-1.png


1. Insert the actuator into valve stem


Installation_Diagram2-1.png

2. Tight two screws use hex key

Installation_Diagram3-1.png

3. Use manual lever to adjust the stroke, then put gasket into slot, last tight the nut

Attention: the assemble must vertical between actuator and valve body


Dimension of S6062B Control Valve Actuator

Dimension-of-S6062B-Control-Valve-Actuator.jpg


Manual Operation:

1. Insert handle

2. Rotate "UP" and "DOWN".

Technical Parameter of S6062B Control Valve Actuator

Item No.

S6062A-DV

S6062A-FV

S6062A-MV

Voltage

AC220±15%

AC24V±15%

AC24V±15%

Power

6.5VA

Input Signal

on off

Floating

0-10VDC/4-20mA

Feedback Signal

-------

------

0-10VDC/4-20mA

Act Speed(mm/s)

0.23(50Hz)

Max. Stroke(mm)

22mm

Output Force(N)

1200

End Connection

Buckle

Height(mm)

230

Weight(kgs)

2.0

Environment Temperature: -5℃~55℃ 2.Storage Temperature:-2℃~85℃ 3. Protect Class: IP 44

S6062A-series-Actuator-Instruction.jpg


Modulating Wiring of S6062B Control Valve Actuator

Modulating-Wiring-of-S6062A-Control-Valve-Actuator.jpg


The Manufacturer of HVAC Control Valves and Valve Actuators The Manufacturer of HVAC Control Valves and Valve Actuators
The HVAC Actuator Valve Working Principle The HVAC Actuator Valve Working Principle
HVAC Control Valves and Actuators HVAC Control Valves and Actuators
Contact Us Product Inquiry
Contact Us
If you are interested in our products.
Please fill in the form & Contact Us.
+86-10-67886688