2 or 3 points
Actuator and damper shaft are bolt-on by screw.
Maximum round shaft φ20 and square shaft 16*16mm.
Direction of rotation can be setting.
With 2 auxiliary switches are optional
Power supply AC/DC 24V or AC 230V
5~85º（Per step 5º）
Auxiliary switch rating
IP44 or IP54
CE UL（Except 230V）
Remark: After lead to the actuator wire through PG joint, the protection level can reach IP54.
There are two auxiliary switches of S6061-32DF damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.
Must make the contact pin(C) in as Same direction as motor plug.
Switch an at 10° Switch b at 80° The switching position can be manually changed to any required position by turning the ratchet.