With 2 auxiliary switches are optional
Power supply AC/DC 24V or AC 230V
5~85º（Per step 5º）
Auxiliary switch rating
IP44 or IP54
CE UL（Except 230V）
Remark: After lead out the Actuator wire by PG joint, the IP Protection can reach IP54.
The rotation angle or working range of the actuator can be adjusted 5°by adapter so that can limit mechanically. You just press the locking clip to lose the adapter.
S6061-08/16AK Damper Actuator can operate by 0(4)…20mA and 0(2)…10V
The electronic controller of VR1 and VR2 can set the scope of control signals discretionally. VR1 is used for setting high-grade signals. And VR2 is used for setting low-grade signals. The leaving factory setting positions are matched with the control signal of 0…20mA, 0…10V.
Must make the contact pin(C) is as Same direction as motor plug.
Switch at 10° - Switch b at 80°
The switching position can be manually changed to any required position by turning the ratchet.
There are two auxiliary switches of S6061-08/16AFK damper actuator, can set the angle 0-90° (factory sets 10° and 80°), it will show a signal when the actuator turns to the setting angle.