Soloon Controls (Beijing) Co., Ltd. +86-10-67886688
English English English
Soloon Controls (Beijing) Co., Ltd.
Soloon Controls (Beijing) Co., Ltd.
Contact Us
S6011-RT/RTH Series of Temperature Transmitter & Temperature-Humidity Transmitter

S6011-RT/RTH Series of Temperature Transmitter & Temperature-Humidity Transmitter

The S6011-RT/RTH series of transmitters provide a passive or active signal that corresponds to the air or water temperature in heating, ventilating and air conditioning applications.


Two types of transmitters are available:

S6011-RH room temperature transmitter

S6011-RTH room temperature-humidity transmitter

S6011-RT/RTH Series of Temperature Transmitter & Temperature-Humidity Transmitter

Specifications of S6011-RT/RTH Series of Temperature Transmitter & Temperature-humidity Transmitter


Operation voltage

DC 24V

Output signal

0~10V or 4-20mA

Measuring range

Temperature 0~50℃

Humidity 0~100%RH

Measuring Accuracy

Temperature ±1℃ or ±0.5℃

RH ±5%RH or ±3%

Ambient temperature

-20℃~60℃

Storage

-40℃~70℃, non-condensing

Housing

ABS


Dimensions of S6011-RT/RTH Series of Temperature Transmitter & Temperature-humidity Transmitter


S6011-RT/RTH Series of Temperature Transmitter & Temperature-Humidity Transmitter


S6011-RT Wiring diagram of S6011-RT/RTH Series of Temperature Transmitter & Temperature-humidity Transmitter


S6011-RT/RTH Series of Temperature Transmitter & Temperature-Humidity Transmitter


S6011-RTH Wiring diagram of S6011-RT/RTH Series of Temperature Transmitter & Temperature-humidity Transmitter


S6011-RT/RTH Series of Temperature Transmitter & Temperature-Humidity Transmitter


Mounting of S6011-RT/RTH Series of Temperature Transmitter & Temperature-humidity Transmitter


  • The transmitters are suitable for direct wall mounting or ceiling mounting using four screw holes on the base. The wiring must be inserted from the back. For mounting:

  • Choose an appropriate location to achieve good control of the ambient temperature. The room transmitters only sense the temperature or humidity at the location where it is mounted.

  • The transmitters should not be mounted close to windows or doors in order to avoid draught. On the other hand, sufficient air circulation must be ensured in order to sense the actual temperature of the room.

  • Place insulation material in the wiring conduit in order to prevent the introduction of air from outside the room.

  • The transmitter should not be exposed to direct radiation or to the sun as this could lead to inaccurate measurement.

Contact Us Product Inquiry
Contact Us
If you are interested in our products.
Please fill in the form & Contact Us.
+86-10-67886688